Excavation services
and More

Our Services

Bar Seven A provides diverse services on small and large-scale residential, commercial, and industrial projects.


We have experience with excavation and demolition projects of just about any scale; from small projects to completing major infrastructure for developers.

We know what we do each day matters. Every job we finish provides opportunities for those we work for, while helping our employees build a solid foundation for their families. We’re humbled to have our hand in the growth and prosperity of Central Oregon.

Call 541-548-4747 Email Us

Call Us Today

We’re ready to take your project from land clearing to on-site rock crushing to final grading. Expertly embedding your project into the earth, we maintain healthy environmental practices, including recycling and re-purposing wood, rock and dirt.

Excavation

Excavation services on diverse, small- and large scale, residential and commercial projects.

  • Site Development-Commercial and Residential
  • Push Outs
  • Trenching
  • Septic System Installation
  • Subdivision Infrastructure
  • Road, Driveway, and Sidewalk Construction
  • Mass and Fine Grading

The cost of excavating a utility trench can vary based on several factors, including:

Trench Length: The overall length of the trench will influence the cost.

Rock Hammering: If rock hammering is necessary, it may increase the expense.

Backfill Requirements: Whether the excavated material can be reused or if imported material is needed will affect the pricing.

Type of Utility: The specific utility being installed can also impact the cost.

To provide an accurate estimate, we recommend speaking with one of our estimators. Please contact our office to schedule a discussion about your project specifics.

To grade and gravel a driveway is a job-specific task depending on the length, width, and depth of gravel required for your driveway. Please call to schedule a time with an estimator who will be happy to help you with your specifications to determine the cost for your project.

We can provide all utility services from traffic control to trenching and pipe installation to final patching of the road. Please contact us to schedule a call to talk to an estimator about your project.

Yes, we are City of Bend Right-Of-Way Certified.

We construct subdivision infrastructure, but we do not perform the production home site dig-outs or utilities.

Yes

Demolition

Offering all the resources under one roof to complete your commercial and residential demolition projects-on time and on budget.

  • 40-yard Demolition Boxes
  • Transfer Trucks to Dispose of the Waste
  • When Possible, Salvageable Wood is Taken to Our Recycle Center, Thereby Reducing Your Cost and Minimizing Landfill Waste.

Rock Crushing

Make use of the dirt and rock on your property or project. Portable crushing plants offer a more economical alternative to hauling off unwanted rocky material or purchasing usable aggregate material.

  • ¾ minus
  • Drain Rock
  • Top Soil
  • Screened Dirt
  • Base Material

Call us to schedule a site visit and meeting to discuss the best strategy for your project. 541-548-4747

No, you can bring your own truck and we’ll load it for you at our yard.

We know your project is on a strict timeline, so call us right away and we can get you on our schedule to begin demolition.

Yes, we sell wood chips at our yard in various sizes and prices.

Trucking

  • Live Floor
  • Dump Truck
  • Chip Hauling
  • Tub/Belly Dump
  • Stellar Box Trucks
  • Lowboy/Equipment Hauling

It depends on the truck and your location. We typically charge by the ton of material plus truck time to deliver the load. Our material and truck rates can be found on the “Materials” tab of our website, however, different trucks can hold different amounts and time to various location can vary. Call our office to speak to someone for project specific pricing.

No, but we do have super dump trucks, which can hold roughly 18 cubic yards or 25 ton of payload without a trailer.

If the area to receive the material is flat side to side, we can spread loads of most aggregate materials with dump trucks; however, it will not result in a finished surface or a consistent depth, width, etc. We recommend using grading equipment to finish all surfaces, even with spread-dumping the load.

Grinding

For any land clearing or grinding project, we have the capabilities to resourcefully collect and process sod, mulch, brush, trees and limbs, as well as other types of waste wood for recycling and other uses.

Typically, we can grind about 200 cubic yards per hour. Large projects can be bid on a per truckload basis. Please call our office to speak with a representative about estimating your project.

Because every situation and job is unique, and the quantity of trees is difficult to determine, we typically require at least five chip truckloads, which equate to approximately 400 cubic yards of ground material, which translates to around 1,000 cubic yards of loose wood debris.

The grinder can accept an 18″ stump; anything larger must be split into two or four pieces. Stumps must be free of dirt and rock.

The customer is responsible for splitting stumps that are larger than 18″ in diameter. Any stumps larger than 18″ will be split on a per-hour basis.

The grinder trailer is mounted on Tracks.

Wood and Aggregate Recycling

Recycled wood fiber is a major component of the management and utilization of construction, demolition and land clearing waste. There are a variety of end uses for secondary wood fiber that support waste-minimization

Clean dirt, rock, asphalt, and rebar-free concrete is free of charge to dispose of. Sod, concrete with rebar, and wood materials are charged a nominal disposal fee. Details can be found on the “Materials” tab of our website.

No, we do not offer volume discounts.

Credit cards are accepted but require an additional 4% processing fee to cover the merchant fees we are charged.

Yes we accept cash.

We do not accept personal checks unless you have completed a personal guarantee and/or established an account with our office.

Yes, and most loads going out are required to be weighed. The scale is available for non-customers to check load weights for a small fee.

A calculator is available on the “Materials” tab of our website to help you estimate the amount of material needed for your project.

A brief sample of our completed projects include:

For More Information Call

541-548-4747

Email Us

admin@barsevena.com